Air Diffuser SEIKA Ecorator

  • most suitable for agitating explosion air of fluid carriers!
  • higher oxygen resolution cfficiency(30% improvement compared with previous levels
  • maintenance free
  • higher agitation efficency (200% improvement compared with previous levels)
  • Hight-performance Air Diffuser for Drainage System
  • Powerful airlift efficiency doubles the agitation effect and is practical for fluid carrier tanks! Oxygen resolution efficiency is 30% higher than with conventional cylindrical rir diffusers.Resulting energy savings are to be expected.
Facebook
Twitter
Email
Print

Air Diffuser SEIKA Ecorator

  • No clogging
  • Large section area of the air emission part avoids any clogging.Intermittent operation is also available
  • No sediment on the tank botto
  • The ejector mechanism employed in the body assures a vast fluid passage area in the cylinder.The ecorator sucks up a large amount of sludge and remaining fluid and is able to equally agitate heavy sludge in the tank.
  • High-efficiency oxygen resolution
  • The ejector and venturi cutter generate fine air bubbles.In addition,the power-ful airlife effect finely breaks down the sucked air bubble water over and over again.

 

Energy saving effect

Smaller risk of damage caused by pressure and high-efficiency oxygen resolution at the air emission component combine to reduce the burden on the blower to enable stable operation with less power consumption.

Perfectly maintenance-free

 

advantages of the SEIKA ecorator(compared with various explosion air methods)

Interior Structure of the SEIKA ecorator

Air is equally distributed all over the cylinder interior by positioning the air emission component on the outside of the inner cylinder and by employing a special gas distribution structure.The air emitted from the emitted from the emission component creates a stripping phenomenon as a result of the newly developed MCV structure.Structural refinement enhances oxygen resolution efficiency

powerful suction power

Employment of a newly developed ejector theory for the air emission component has more than doubled suction power compared with our conventional sister product SA-130

 

Basis for the lack of clogging

1.The large section area of the air emission component seldom incurs a back-flow.

2.the air emission sectionarea is about 40 times that of the membrane diffuser

 

Principle of fine air bubble creation

1. The air emission component is on the outside of the inner cylinder and the air and water is split with a cutter for efficient mixing.

2. The venturi cutter employs aeromechanics which generate a pressure difference between passing water and air bubbles,splitting the air bubbles,and refining the structure

3. The unique powerful suction sucks a large amount of sludge water from the tank bottom,increases contact with the air bubbles,and heightens the oxygen resolution efficiency.

 

SPECIFICATIONS DATA SEIKA Ecorator

Model Material Air blow amount per pipe (m3/min) Agitation area per pipe Water depth
Body Air piping Connector Weight
(kg)
Lower limit Stan-
dard
Upper limit
ECO-1000 PP SUS304
(JIS10K40A flange)
Integrated (PP/SUS) 4.0 0.7 1 1.4 6~7㎡ 2m+