Diaphragm Pump CHEMPRO DP25 – Aluminum
Chempro Diaphragm Pump DP25 is the smallest model in the DP family. The pump is made of plastic material in the AL type. It has the advantage of being highly resistant to chemical corrosion The diaphragm pump has suction-compression operation. Superbly designed It has corrosion resistance, good pressure resistance and has a long service life. Installed in an area with sparks (Explosion Proof) due to the wind to drive.
Facebook
Twitter
Email
Print
Diaphragm Pump CHEMPRO DP25 – Aluminum
- Diaphragm pump Can be used with flammable liquids (Explosion-proof)
- able to run dry
- Can be used with liquid that has sediment suspended in it
- Can be used with high viscosity liquids
- Can be used with acids, alkalis and other chemicals
- Can adjust the flow rate and pressure.
- Self-priming in yourself
Technical data CHEMPRO DP25 – Aluminum
| Material Quality | ||||
| Pump body | Aluminum, cast iron | |||
| Diaphragm | Santoprene, Hytrel, teflon, Viton, EPDM, Buna-N | |||
| Valve Seat | Santoprene, Hytrel, teflon, Viton, Stainless steel | |||
| Valve Ball | Santoprene, Hytrel, teflon, Viton, Stainless steel, Ceramic | |||
| Center block | PP, Aluminum, Stainless steel | |||
| Technical Parameter | ||
| Suction lift [mwc] | dry | 4 |
| wet | 8 | |
| Max particle diameter [mm] | 4 | |
| Suction and discharge Size [in] | 1″ | |
| AIR inlet size [in] | 1/2 | |
| Max frow [I/min] | 157 | |
| Maxhead [m] | 84 | |
| Max air inlet pressure [bar] | 8.4 | |
