Centrifugal Pump FORUS JXM Series
Foras Model JXM centrifugal pump is a self-suction centrifugal pump. Pipe size 1 inch, motor size 1 horsepower, can send a maximum of 48-40 meters Flow rate of 10-60 liters / minute. Power is available in 1 phase and 3 phase.
Facebook
Twitter
Email
Print
Centrifugal Pump FORUS JXM Series
The machine
The nautilus body is made of high quality cast iron, rust-proof Resulting in longer service life of The pump Reduce The cost of replacing a new pump.
The impeller is made of brass, not rust. Without problems in use in all conditions
SUS304 stainless steel shaft, anti-rust, high corrosion resistance, thus helping to prolong The service life
- Maximum liquid temperature resistant to 40 degrees, can be used in a variety of applications.
- Suction up to 8 meters deep.
The motor
- Motor made from high quality 100% copper wire for full power Does not cause the cycle to fall, resulting in longer service life Motor body Manufactured from lightweight aluminum. Good heat dissipation, Good heat dissipation, which can prolong The service life.
- CLASS F insulation, heat resistant to 150 degrees, helping to prolong motor life IP55, can prevent small dust And prevents raindrops or large drops of water can help extend The lifespan even further And save money
- Resistant to environmental temperatures up to 40 degrees.
Specifications
| CARATTERISTICHE COSTRUTTIVE / CONSTRUCTION FEATURES CARACTERISTICAS CONSTRUCTIVAS / CARACTERISTIQUES D’EXECUTION |
|
| Corpo pompa | acciaio AISI 304 |
| Pump body | stainless steel AISI 304 |
| Cuerpo bomba | acero AISI 304 |
| Corps de pompe | acier AISI 304 |
| Supporto motore | alluminio |
| Motor bracket | alluminium |
| Soporte motor | alluminio |
| Support moteur | alluminium |
| Girante | Noryl® |
| Impeller | |
| Rodete | |
| Turbine | |
| Tenuta meccanica | ceramica-grafite |
| Mechanical seal | ceramic-graphite |
| Sello mecanico | ceramica-grafito |
| Garniture mecanique | ceramique-graphite |
| Albero motore | acciaio AISI 416 |
| Motor shaft | stainless steel AISI 416 |
| Eje motor | acero AISI 416 |
| Arbre moteur | acier AISI 416 |
| Temperatura del liquido | |
| Liquid temperature | 0 – 50 °C |
| Temperatura del liquido | |
| Temperature du liquide | |
| Pressione di esercizio | |
| Operating pressure | max 8 bar |
| Presion de trabajo | |
| Pression de fonctionnement | |
| MOTORE / MOTOR / MOTOR / MOTEUR | |
| Motore 2 poli a induzione | 3- 230/400V-50Hz |
| 1-230V-50Hz | |
| 2 pole induction motor | con termoprotettore |
| Motor de 2 polos a induccion | with thermal protection |
| con proteccion termica | |
| Moteur a induction a 2 poles | avec protection thermique |
| Classe di isolamento | |
| Insulation class | F |
| Clase de aislamiento | |
| Classe d’isolation | |
| Grado di protezione | |
| Protection degree | IP44 |
| Grado de protección | |
| Protection | |
Performance Curve
| TYPE | P2 | P1 (kW) | AMPERE | Q (m3/h-l/min) | |||||||||
| 1~ | 3~ | 1~ | 3~ | 0 | 0.6 | 1.2 | 2.4 | 3.6 | 4.8 | ||||
| 0 | 10 | 20 | 40 | 60 | 80 | ||||||||
| (HP) | (kW) | 1~ | 3~ | 1×230 V (50 Hz) | 3×400 V (50 Hz) | H (m) | |||||||
| JXM 105/4 | JXM 105/4 T | 1 | 0.74 | 1.07 | 1.1 | 5 | 1.9 | 43 | 41.5 | 40 | 34 | 25 | 12 |
| JXM 125/5 | JXM 125/5 T | 1.2 | 0.88 | 1.27 | 1.33 | 6.1 | 2.3 | 53 | 51 | 48 | 42 | 34 | 21 |
Dimensions
| TYPE | DIMENSIONS(mm) | CUBE | Kg | |||||||||||
| A | B | C | D | E | F | H1 | H2 | DNA | DNM | I | L | M | ||
| JXM 105/4 | 208 | 128 | 410 | 175 | 140 | 215 | 153 | 210 | 1″G | 1″G | 430 | 210 | 235 | 11.1 |
| JXM 125/5 | 208 | 128 | 410 | 175 | 140 | 215 | 153 | 210 | 1″G | 1″G | 430 | 210 | 235 | 11.7 |
