Centrifugal Pump VOLUTE CCD Series are derived from ECD series according to the European standard DIN24255/BS EN733 of performance. Pump shaft & motor shaft are close-coupled design. This way of coupling ensures the alignment of pump and motor, Pump impeller runs is good balance both dynamically and statically. Therefore pump would be kept very well in operation.
Centrifugal Pump VOLUTE CCD SERIES (DIN24255 / BS EN733)
Centrifugal pump motor attached to the pumps body (DIN / IEC motor)
The CCD series centrifugal pump are from the European ECD standard DIN24255 / BSEN733. It is a rear-mounted motor pumps.
The pumps shaft and motor shaft are designed to be tightly connected. This Work to ensure that the alignment of the pump and motor helps the pumps impeller to work well. Both dynamic and static Therefore, the pumps will be able to work efficiently.
The CCD series centrifugal pumps are designed to be driven by an IEC standard motor compared to the direct ECD pumps coupled with the CCD motor unit. The length is shorter, therefore requires less space for installation. And can also adjust various levels of work through trimming the propellers into ECD pumps sets.
| MODEL | VOLUTE CCD | ||
| Capacity (Q) | m3/h | Up to 50 | |
| Head (H) | m. | Up to 150 | |
| Temperature (T) | °C | Up to 105 | |
| Speed (n) | rpm | 2900/1450/980 | |
| 3500/1750/1180 | |||
| Operating Pressure bar | standard 16 | on request 16 | |
